Close this search box.

Dapperly Club is reader-supported. When you purchase through one of our links we may earn an affiliate commission (at no cost to you).

How To Get Beard Dye Off Skin: 5 Steps To Clean Mucky Stains


Dyeing your beards can easily transform you from a cute nerd to a hot baddie. Most men are aware of this but they always miss out on calling professional help.

Even if they attain the desired result, they invariably end up with stains on their skin and palms! This is not so great especially when strangers start giving them funny stares. Fortunately, you can easily remove these beard dye stains from your skin by following the instructions in this article.

Stepwise Direction On How To Remove Beard Dye From Skin

When beard dyes stain your skin, the most practical thing is to wait it out. Allow it to fade off naturally. Most dyes, especially the semi-permanent beard dyes, can only last a week or two before they clear off.

However, if the stain is so large and prominent that you feel you can't get to work the following day with it, then the next thing you should do is to look for ways to clean it off.

The below steps can be your starting point in removing beard dye from skin or hands:

Step 1: Pick A Suitable Dye Removal Product

Dye Removal Product

You know that you have got yourself some work to do when you notice beard dye stains that won't come off by simply wiping with a wet napkin. 

Getting an effective beard dye removal product should be your first action. You could opt for commercially available products or settle for some DIY techniques. 

If a commercial product is out of your reach, then homemade methods are your best bet. Some methods include:

#1 Regular Soap With Water


This should be the fastest thing you could lay your hands on, and believe me, this method effectively removes beard dye stain.

Hand soaps are formulated to remove germs and dirt from hands, and a beard dye stain might also be inclusive, provided it's a fresh stain. Thus, you can use a mixture of your hand soap and water to clean off the dye stain from your facial skin.

#2 Dish Soap And Baking Soda Mix

Dishwashing Soap

Dish soaps are stronger than regular hand soaps and an effective grease stain remover. Likewise, baking soda is commonly known for its cleansing action and is a significant ingredient in most cleaning products.

Therefore, a mixture of these cleansing agents can perform wonders in removing the beard or hair dye from your skin.

#3 Rubbing Alcohol

Rubbing Alcohol

Rubbing alcohol is an effective bleaching agent that could be used to remove dyes from surfaces. It can also clean off beard dye stains from your skin or palms.

However, if you have sensitive skin, avoid rubbing alcohol because it produces moderate skin irritation.

#4 Olive Oil/ Baby Oil

Olive Oil/Baby Oil

Baby oil might be a strange suggestion, especially if you don't have a baby. In that case, olive oil would be an excellent substitute. These oils are great cleansers and can help you remove beard dye stains from your skin. They help break down the dye, thus enabling easy removal.

One great advantage of this method is that it's suitable for all skin types and would not cause any skin reactions. These oils have soothing abilities that are great for your facial skin.

#5 Nail Polish Remover

Nail Polish Remover

This dye removal agent is very effective but must be used with caution. Applying this on your face is something I won't recommend; however, if you've got stains on your palms, you can go ahead.

The acetone-based nail polish remover can be pretty harsh on the skin, so if you decide to apply it to your skin, ensure you discontinue on any sign of discomfort or irritation. Also, avoid contact with your eyes.

#6 Toothpaste


Your non-gel toothpaste can perform magic for you when it comes to that beard or hair dye stain. Toothpaste is a cleansing agent formulated with numerous other cleansers like baking soda, making it very effective in removing tough stains on your teeth, surfaces, and dye stains.

#7 Make-up Remover

Make-Up Remover

Wait! Before you cross out this method, you should know it's super effective for removing stains like beard dyes or hair dyes. You could ask your sister, mom, wife, or girlfriend for their makeup remover and apply it on that dye stain that refused to clean off. 

These products are designed to remove makeup products from sensitive areas like the eyelids and underneath the eyes. Thus, your skin is safe with such products as they won't harm or cause any skin irritation.

Now that you have seen some DIY methods for removing dye stains, you have to figure out which one you intend to use. This could be based on availability or preference. 

Step 2: Conduct A Patch Test

Facial skin types differ, and while some might have a normal skin type that can withstand anything, others deal with super sensitive skin prone to irritation or rashes. Therefore, blindly using any of the above methods without conducting a test known as a patch test is simply irrational.

After deciding on the method to use how to get beard dye off the face, you need to conduct a patch test before using it. This is done by applying a small portion of the mixture to a small part of your skin, preferably the most sensitive part of your face that is also more hidden.

Watch out for any sign of irritation instantly or after a day. If there are none, then you can go ahead with using the mixture as intended. If there are, it simply tells you to change the technique, or you might end up with a blotchy face.

Step 3: Dip A Cotton Ball Into The Mixture

If, after the patch test, you realize you're not allergic or sensitive to the method, you should apply it to the stained hands or skin.

Firstly, dip a cotton pad or ball into the prepared mixture and get ready to apply. A cotton pad is preferable to a more abrasive scrub like a towel. This is because the skin is soft and sensitive. Using something as harsh and abrasive as a face towel can cause your skin to become irritated.

A soft choice like cotton balls is more effective in cleaning while protecting your skin.

Step 4: Apply The Removal Product To The Stained Skin

After soaking the cotton pad with the product, the next thing is to apply the product evenly to the stained part of the skin.

It would be best to let it sit for 5 to 10 minutes or longer before washing. This is usually influenced by the severity of the stain or how big the stained area is. 

Step 5: Rinse With Lukewarm Water

This is the final step on how to remove Just For Men's beard dye from skin.

After letting the product get absorbed by the skin, you need to rinse it off thoroughly with warm water to enable your skin pores to open and easily remove the dye stain.

You could repeat the whole procedure till you get your desired results. 

How To Prevent Beard Dye From Staining Your Skin

Happy man with red-dyed beard

It's pretty easy for beard dyes to leave a stain on the skin surrounding your beards and your hands, especially if you're not a professional at doing such a task. Newbies can prevent this from happening by following some tips:

1. Wear Hand Gloves

This is usually the first step when preparing to dye your beards. Your protection kit is essential, ranging from latex gloves and moisturizer to a towel. 

Wearing latex or disposable hand gloves would help protect your hands from stains from beard dyes. Likewise, wrapping a towel around your chest would prevent the dye from dropping on your shirt and risk ruining it with dye stains.

2. Use A Moisturizer

Moisturizers like petroleum jelly or moisturizing cream would go a long way in creating a barrier between your beards and the skin surrounding them. The trick here is to grab a handful of the petroleum jelly and rub it around the surrounding facial skin till it forms a thick layer.

This way, the dye won't be able to penetrate through the oily layer to stain your skin.

And if you're worried about this method ruining the overall end look, you don't have to. A cotton pad soaked in soapy water would help clean off the moisturizer.

3. Have A Cotton Ball At Hand

This is pretty essential. No matter how careful you might seem, there would always be that errant drop of beard dye that just refuses to cooperate with you. 

So, a cotton pad soaked in soapy water should always be around you when dyeing your beards. 

This would enable you to clean up as you go. You don't want to wait till the end before you wipe off that drop. Waiting till the end would cause you more stress when trying to get the stain off your skin.

4. Practice The Slow And Steady Approach

When planning to dye your beards, it's not something you fix on a day you have to run out for important errands. You have to dedicate enough time to such a task.

The more you rush the process, the more likely you will end up with dye stains around your palms, fingers, and skin. So, most times, I always suggest people do it in a slow (not sluggish) steady manner for a more admirable outcome.

Dapper Point: Sometimes you have to learn the basics of anything to do everything properly. This is true for removing beard dyes. If you're irritated with colorants staining your skin or hands, then read our article about beard dye removal -- How To Remove Beard Dye.

Frequently Asked Questions

How Long Does Beard Dye Last On The Skin?

A good beard dye should last long before fading; thus, when such a dye stains the skin, it could stay on it for one to two weeks before fading off completely. Therefore, if the dye stain isn't obvious, you might want to wait it out rather than applying any dye removal products.

Also, our skin sheds off dead cells to regenerate new skin cells regularly, so it's most likely that stained skin will be replaced with a new one sooner than you expected. This all depends on how fast your skin regenerates.

Can Beard Dye Damage Skin?

You must have heard in your science class that dyes are carcinogenic, and that's why you're worried if the beard dye that stained your skin can cause damage to it. But the good news is that beard dyes are formulated not to be toxic or harmful to the skin. In addition, there's no scientific proof that using a beard dye could cause your skin harm.

A mild irritation might occur when using some particular beard dye brands. This is usually nothing to worry about.

Does Vaseline Remove Hair Dye Stains From Skin?

Yes. While Vaseline or petroleum jelly is more of a protection technique, it can still come in handy in removing hair dyes from your skin. Rubbing sufficient Vaseline on the stained skin or hands and letting it sit for hours can surely help. Vaseline would absorb most of the dye, making it easy to come off your skin.

How Do I Remove Beard Dye From My Clothes?

Perhaps in dyeing your beards, you ended up staining your clothes. The DIYs mentioned above can help remove the stain.

It's important to know that this can only be effective if done as soon as you notice the stain. Using your preferred removal method, scrub the stained part of the cloth and allow it to soak for a few hours before washing.

Does Just For Men Stain Skin?

Yes, it does. Like every other beard dye brand, Just For Men tends to stain skin, especially if done by an unprofessional. By using any of the aforementioned dye removal agents, however, you are good to go!


There you go, guys!

Five easy-to-do steps on how to get beard dye off the face. The techniques mentioned above are practical, affordable, and super effective. While some of these techniques have worked for me, they might not work for you. You have to conduct experiments until you find the best ideal one. In addition, always remember to conduct a patch test before using any chemical agents to avoid irritated skin.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top